TECHNICAL SPECIFICATIONS

LOCATION-READY DESIGN

The robot is designed for fast and efficient use on location. It can be easily unloaded from a standard utility vehicle like a Hi-Ace, with minimal setup time once on site. Motion programming is handled through an intuitive interface, allowing quick adjustments to suit each shot. Camera mount changes and configuration updates take only a few minutes, and the entire system can be dismantled quickly, maximizing operating time throughout the day.


CINEBOT JR ON TRAKS SPECIFICATIONS


OPERATING ENVELOPE


3.2m / 10.5ft
0m / 0ft

Maximum Height (from ground)
Lowest Position

Maximum reach (from rotate center))

1.75m / 5.7ft


RIG PERFORMANCE


Arm Arc move .
Arm combined with track .
Track

3.6 m/s max. speed at camera
5.6 m/s max. speed at camera
2 m/s (1.8m track lenghts)

Track weight (1.8m length)
Standard Riser

17kg / 37lbs
20cm / 7.9 inches

Maximum reach

1.2m / 3’9”

+/- 360º 120º/s
+/- 360º 120º/s
+/- 360º 150º/s
+/- 360º 210º/s
+/- 360º 210º/s +/- 360º 210º/s

Base Rotate
Shoulder Lift
Elbow
Pan
Tilt
Roll



TRACK & RISER SPECIFICATIONS

Track width
Track width with stabilisers
Track weight (1.8m length)

61cm wide
116cm wide
27kg / 59lbs


WEIGHTS


Cinebot Max Arm Weight
Cinebot Max Base Weight

64kg/145lbs
47kg/104lbs

Maximum Camera Payload

20kg / 44lbs


POWER SPECIFICATIONS


Power Requirements

110/240 VAC

Optional Battery Unit

3600 Wh

CINEBOT MAX ON TRAKS SPECIFICATIONS


OPERATING ENVELOPE


Maximum Height (from ground)
Lowest Position

2.5m / 8’2”
0m / 0”


RIG PERFORMANCE


Ulnimited range of travel @3m/s
+/- 180º range of travel @ 400º/s
+/- 147.5 - 180º range of travel @ 390º/s
+/- 145º range of travel @ 400º/s

Track
Rotate
Lift
Arm

+/- 270º range of travel @ 540º/s
+/- 140º/115º range of travel @ 475º/s
+/- 270º range of travel @ 760º/s

Pan
Tilt
Roll


RIG WEIGHT


BoltvJR + Base.

114 + 180 (294kg)/648lbs

Maximum Camera Payload

10kg/22lbs

note counter weights may be required on the shot and length of track


POWER CONNECTION

Power Requirements

2k VA (Bolt Jr.) 10k VA (Bolt Jr on track)

3x 200-400 volts, 16 amps

Generator


DOWNLOAD